How to make the Storage Pallet Racks? Many manufacturers make it with bending machine in the past days. But now, more and more manufacturer will choose the Roll Forming Machine to make it. The advantage is distintly: high output, less labour and lower cost.

The storage Pallet Racks including the Upright/Pillar, Beam, Bracing, Connector/Bracket and the Bottom Plate. Except the Bottom Plate, the other parts could be made by Roll Forming Machine. LMS Upright Racking Roll Forming Machine, including the decoiler, straightening machine, Roll Forming Machine, run out table and PLC control pannel. The feeding material will be coil, and the finished product is the Upright Racks which you want to make.The width could be adjustable, length and the quanity could be set by PLC. You just need 1~2 workers to operate this machine.

Videos:LMS Racking Upright Roll Forming Machine http://www.lnzmachinery.com/en/video/roll-forming-machine-video/storage-roll-forming-machine-v/lms-racking-upright-roll-forming-machine.html The beam for the storage pallet rack, including Step Beam(P Beam), box beam, and closed beam. The different beam, the machine’s configuration is different. Video: LMS Step Beam

Roll Forming with Welding http://www.lnzmachinery.com/en/video/roll-forming-machine-video/storage-roll-forming-machine-v/lms-step-beam-roll-forming-with-welding.html The Connector/Bracket, could be made by Roll Forming Machine. The feeding material is coil, and come out the finished product. Compare to the above machines, the Bracing is a very simple and small machine. Width and height could be adjustable.